Distributor/Agen Resmi Boonton Indonesia - 4240 RF Power Meter

Distributor/Agen Resmi Boonton Indonesia - 4240 RF Power Meter

RF Power Meters ,RF Power Sensors ,RF Volt Meters ,Modulation Analyzers ,Audio Analyzers ,Capacitance Meters ,PIM Testers

---

4240 RF Power Meter

The 4240 series of CW RF power meters provides the high speed measurement capability needed in a production environment, as well as the simplicity of operation required for bench top use. It provides very accurate measurements from -70 dBm to +44 dBm (sensor dependent) and has a rapid display update rate for tuning applications. The easy to read LCD displays both channels simultaneously with numeric and bar graph information.

Quick Features

• -70 dBm to +44 dBm, depending on sensor
• 90 dB dynamic range, depending on sensor
• 10 kHz to 40 Ghz measurement range
• Single or dual-channel display
• >200 measurements per second
• Agilent HP 437 & Agilent HP 438,  and Boonton 4220A & 4230A emulation
• Automatically loads sensor data
• Simple software control via SCPI language
• 50 MHz step calibrator
• IEEE-488 and RS-232 interfaces standard

Distributor/Agen Resmi Boonton Indonesia - 4530 Peak Power Meter

Distributor/Agen Resmi Boonton Indonesia - 4530 Peak Power Meter

RF Power Meters ,RF Power Sensors ,RF Volt Meters ,Modulation Analyzers ,Audio Analyzers ,Capacitance Meters ,PIM Testers

---

4530 Peak Power Meter

The 4530 series RF Peak Power Meter can make Peak, CW Power and RF Voltage measurements at high speed from 10 Hz to 40 GHz.

Quick Specifications

Sensor Inputs
RF channels	1 or 2
RF frequency range	10 MHz to 40 GHz*
Peak pwr range	-40 to +20 dBm*
Modulated pwer range	-60 to +20 dBm
Video Bandwidth	20 MHz*
Acquisition and Measurement System
Time resolution	20 ms
A/D Converter	12 bit
DSP	32 bit floating point
Trigger
Ext Trig range, impedance	+/-15V, +/-50V
Min trig pulse width	20 ns
Max trig rate	1.8 MHz
Calibrator Source
Internal Calibrator	1 GHz, CW/Pulse -50 to +20 dBm
* Sensor Dependent, Calibrator Dependent
Pulse Mode Operation (Automatic)
Pulse width	Pulse rise-time
Pulse fall-time	Pulse period
Pulse repetition frequency	Pulse duty cycle
Pulse off-time	Peak power
Pulse on power	Pulse overshoot (dB or %)
Waveform Average power	Top level power (IEEE spec)
Bottom level power (IEEE spec)
Marker Measurements
Markers (vertical cursors) Settable in time relative to the trigger position
Markers independently Average, minimum, peak power at a single time offset
Pair of Markers Average, minimum, peak power over the interval between markers, power ratio between markers

Distributor/Agen Resmi Boonton Indonesia - 4540 Peak Power Meter

Distributor/Agen Resmi Boonton Indonesia - 4540 Peak Power Meter

RF Power Meters ,RF Power Sensors ,RF Volt Meters ,Modulation Analyzers ,Audio Analyzers ,Capacitance Meters ,PIM Testers

---

4540 Peak Power Meter

Boonton’s versatile 4541 (1 Ch) and 4542 (2 Ch) combined Peak / Average Power and Voltage meters are leading edge instruments for most accurate RF measurements. Features like high dynamic range, rise time of less than 7ns and an effective time resolution of 200 ps provide the greatest detail in signal waveform analysis. These meters are the instruments of choice for capturing, displaying and analyzing RF power in both the time and statistical domains. Applications include pulsed RF signals such as RADAR, MRI particle accelerators, pseudorandom or noise-like signals such as CDMA, WLAN and WiMAX, LTE, UMTS. The high dynamic range and very fast sampling rate make the 4540 series also ideal to measure RF telecommunication amplifiers. Both Boonton 4541 and 4542 Power meters, have built in step calibrators for highest accuracy allowing calibrating sensors over their full range right before the measurement. A wide range of power sensors and voltage probes is available for these instruments. 

Quick Specifications

Sensor Inputs
RF Channels	1 or 2
RF Frequency Range	9.9 kHz to 110 GHz*
Peak Pwr range	-50 to +20 dBm*
CW Pwr range	-70 to +44 dBm*
Acquisition and Measurement System
Time resolution	0.2 ns
A/D Converter	14 bit
DSP	32 bit floating point
Trigger
Ext Trig range, impedance	±5V, 1 Mohm
Min trig pulse width	15 ns
Max trig rate	30 MHz
Calibrator Source
Internal Calibrator	50.025 MHz, CW -60 to +20 dBm
* Sensor Dependent, Calibrator Dependent
Pulse Mode Operation (Automatic)
Pulse width	Pulse rise-time
Pulse fall-time	Pulse period
Pulse repetition frequency	Pulse duty cycle
Pulse off-time	Peak power
Pulse “on” power	Pulse overshoot (dB or %)
Waveform Average power	Top level power (IEEE spec)
Bottom level power (IEEE spec)	Edge delay
Edge skew (2 channel instruments only)
Marker Measurements
Markers (vertical cursors) Settable in time relative to the trigger position
Markers independently Average, minimum, peak power at a single time offset
Pair of Markers Average, minimum, peak power over the interval between markers, power ratio between markers

Distributor/Agen Resmi Boonton Indonesia - 4500B Peak Power Meter

Distributor/Agen Resmi Boonton Indonesia - 4500B Peak Power Meter

RF Power Meters ,RF Power Sensors ,RF Volt Meters ,Modulation Analyzers ,Audio Analyzers ,Capacitance Meters ,PIM Testers

---

4500B Peak Power Meter

The 4500B Peak Power Analyzer has been totally redesigned from the inside out. This meter is taking performance to a new peak and changing the way the industry views and analyzes RF data.

Quick Specifications

Sensor Inputs
RF channels	1 or 2
RF frequency range	1 MHz to 40 GHz*
Peak power range	-50 to +20 dBm*
Modulated power range	-60 to +40 dBm
Acquisition and Measurement System
Time resolution	0.1 ns
A/D Converter	14 bit
DSP	32 bit floating point
Trigger
Ext Trig range, impedance	+/-5V or +/-50V, 1M or 50 ohms
Min trig pulse width	6 ns
Max trig rate	50 MHz
Calibrator Source
Internal Calibrator	1.024 GHz, CW/Pulse -50 to +20 dBm
* Sensor Dependent, Calibrator Dependent
Pulse Mode Operation (Automatic)
Pulse width	Pulse rise-time
Pulse fall-time	Pulse period
Pulse repetition frequency	Pulse duty cycle
Pulse off-time	Peak power
Pulse on power	Pulse overshoot (dB or %)
Waveform Average power	Top level power (IEEE spec)
Bottom level power (IEEE spec)	Edge delay
Edge skew (2 channel instruments only)
Marker Measurements
Markers (vertical cursors) Settable in time relative to the trigger position
Markers independently Average, minimum, peak power at a single time offset
Pair of Markers Average, minimum, peak power over the interval between markers, power ratio between markers

Distributor/Agen Resmi Boonton Indonesia - RF Power Meters

Distributor/Agen Resmi Boonton Indonesia - RF Power Meters

RF Power Meters ,RF Power Sensors ,RF Volt Meters ,Modulation Analyzers ,Audio Analyzers ,Capacitance Meters ,PIM Testers

---

RF Power Meters

4500B Peak Power Meter

The 4500B Peak Power Analyzer has been totally redesigned from the inside out. This meter is taking performance to a new peak and changing the way the industry views and analyzes RF data.

4540 Peak Power Meter

The Boonton model 4540 Series RF Power Meter is the instrument of choice for capturing, displaying and analyzing RF power in both the time and statistical domains. Applications include pulsed RF signals such as radar, TDMA and GSM, pseudorandom or noise-like signals such as CDMA, WLAN and WiMAX.

4530 Peak Power Meter

The 4530 series RF Peak Power Meter can make Peak, CW Power and RF Voltage measurements at high speed from 10 Hz to 40 GHz.

4240 RF Power Meter

The 4240 series of CW RF power meters provides the high speed measurement capability needed in a production environment, as well as the simplicity of operation required for bench top use.

The New 55 Series Wideband USB Power Sensor

Boonton once again sets the standard for fast RF power measurements with the introduction of its 55 Series Wideband USB power sensors. Built with Boonton’s Real-Time Power Processing™ technology, this new product line offers speed and accuracy never before seen in a USB form factor.

52000 Series USB CW Power Sensor

The 52000 series power sensors are complete miniature RF & Microwave power meters. They contain a CPU which controls the sensor, processes the measurement results and operates the interface. All measurement data and settings can be transmitted via a USB interface to and from a PC.